Carbon nanotubes buckypapers: A new frontier in wastewater treatment technology.

Occurrence of contaminants in water is one of the major global concerns humanity is still facing today: most of them are extremely toxic and dangerous for human health, obliging their removal for a proper and correct process of sanitation. Among wastewater treatment technologies, in the view of development of sustainable and environmentally friendly processes, membrane adsorption has proved to be a fast and simple method in the removal of pollutants, offering great contaminants recovery percentages, fast adsorbent regeneration and recycle, and easy scale-up. Due to their large surface area and tunable chemistry, carbon nanotubes (CNTs)-based materials revealed to be extraordinary adsorbents, exceeding by far performances of ordinary organic and inorganic membranes such as polyethersulfone, polyvinylidene fluoride, polytetrafluoroethylene, ceramics, currently employed in membrane technologies for wastewater treatment. In consideration of this, the review aims to summarize recent developments in the field of carbon nanotubes-based materials for pollutants recovery from water through adsorption processes. After a brief introduction concerning what adsorption phenomenon is and how it is performed and governed by using carbon nanotubes-based materials, the review discusses into detail the employment of three common typologies of CNTs-based materials (CNTs powders, CNTs-doped polymeric membranes and CNTs membranes) in adsorption process for the removal of water pollutants. Particularly focus will be devoted on the emergent category of self-standing CNTs membranes (buckypapers), made entirely of carbon nanotubes, exhibiting superior performances than CNTs and CNTs-doped polymeric membranes in terms of preparation strategy, recovery percentages of pollutants and regeneration possibilities. The extremely encouraging results presented in this review aim to support and pave the way to the introduction of alternative and more efficient pathways in wastewater treatment technologies to contrast the problem of water pollution.

A New Approach for Bioremediation of Olive Mill Wastewaters: Combination of Straw Filtration and Nanofiltration.

A combination of straw filtration and nanofiltration was investigated for the first time as a sustainable approach aimed at valorizing olive mill wastewaters (OMWs) within a circular economy strategy. Ground straw filters with different granulometry (120, 250 and 500 µm) were tested in the first step to clarify the raw wastewater. The 500 µm filter offered the best performance due to a lower exposed surface of the filtering fibers and a shorter filtering time, allowing us to reduce about 70% of the chemical oxygen demand (COD) of the raw wastewater. Three different commercial membranes in a flat-sheet configuration with a molecular weight cut-off (MWCO) in the range 150-500 Da were tested to fractionate the clarified wastewater according to a dead-end configuration. Among the investigated membranes, a polymeric membrane of 500 Da (NFA-12A) exhibited the highest productivity in selected operating conditions (steady-state values of 11.4 L/m2 h at 20 bar and 24 ± 2 °C). In addition, flux decays for this membrane were lower than the other two tested membranes, indicating a lower propensity to fouling phenomena. Higher rejections towards total polyphenols and total antioxidant activity (TAA) (76.6% and 73.2%, respectively) were also observed for this membrane. Flavanols and hydroxycinnamic acids were retained by more than 99%. The combination of straw filtration and NF with the NFA-12A membrane allowed us to reduce the COD of raw OMWs up to 97.6%. The retentate fraction of this membrane exhibited a TAA of 18.9 ± 0.7 mM Trolox, supporting its propensity for the development of innovative formulations of interest in food and nutraceutical applications.

Curcumin-Sodium Alginate and Curcumin-Chitosan Conjugates as Drug Delivery Systems: An Interesting Rheological Behaviour.

The conjugation of polyphenols is a valuable strategy with which to confer tailored properties to polymeric materials of biomedical interest. Within this investigation, we aim to explore the possibility to use this synthetic approach to increase the viscosity of conjugates, thus allowing the release of a loaded therapeutic to be better controlled over time than in neat polyphenols. Curcumin (CUR) was conjugated to sodium alginate (CA) and chitosan (CS) with functionalisation degrees of 9.2 (SA-CUR) and 15.4 (CS-CUR) mg g-1. Calorimetric analyses showed higher degrees of chain rigidity upon conjugation, with a shift of the degradation peaks to higher temperatures (from 239 to 245 °C and from 296 to 303 °C for SA-CUR and CS-CUR, respectively). Rheological analyses were used to prove the enhanced interconnection between the polymer chains in the conjugates, confirmed by the weak gel parameters, A and z. Moreover, the typical non-Newtonian behaviour of the high-molecular-weight polysaccharides was recorded, together with an enhancement of the activation energy, Ea, in CS-CUR vs. CS (opposite behaviour recorded for SA-CUR vs. SA). The evaluation of the delivery performance (of Doxorubicin as a model drug) showed sustained release profiles, opening opportunities for the development of controlled delivery systems.

A model for the adsorption process of water dissolved elements flowing into reactive porous media: Characterization and sizing of water mining/filtering systems.

This study presents a mathematical model describing the adsorption-desorption process of water dissolved elements onto reactive porous materials during filtering operations performed under dynamic flow conditions. The developed model is based on a reversible second order adsorption kinetic featuring the progressive reduction of the purifying capacity of the filtering material due to the gradual exhaustion of the active sites available for solute retention. It enables the simulation of the performances of water filtering systems through the use of parameters having a clear chemical-physical significance or it can be used for the estimation of these parameters to characterize the adsorption properties of the reactive material. Starting from the same adsorptive conceptual model used for the filtering system marked by ongoing flowing conditions, an adaptation for static systems was performed on the mathematical framework in order to process the same chemical physical parameters in both schemes. Adsorption laboratory tests were carried out to validate the developed model. Results show that the kinetic constants and adsorption capacities (a maximum of about 45 mg g-1 was obtained for the tested material) are highly comparable, both within the same experimental system, and between different experimental setup. This confirms the validity of the developed model which is able to perfectly fit the observed concentration data in all tested configurations.

Microplastics in aquatic systems, a comprehensive review: origination, accumulation, impact, and removal technologies.

Although the discovery of plastic in the last century has brought enormous benefits to daily activities, it must be said that its use produces countless environmental problems that are difficult to solve. The indiscriminate use and the increase in industrial production of cleaning, cosmetic, packaging, fertilizer, automotive, construction and pharmaceutical products have introduced tons of plastics and microplastics into the environment. The latter are of greatest concern due to their size and their omnipresence in the various environmental sectors. Today, they represent a contaminant of increasing ecotoxicological interest especially in aquatic environments due to their high stability and diffusion. In this regard, this critical review aims to describe the different sources of microplastics, emphasizing their effects in aquatic ecosystems and the danger to the health of living beings, while examining, at the same time, those few modelling studies conducted to estimate the future impact of plastic towards the marine ecosystem. Furthermore, this review summarizes the latest scientific advances related to removal techniques, evaluating their advantages and disadvantages. The final purpose is to highlight the great environmental problem that we are going to face in the coming decades, and the need to develop appropriate strategies to invert the current scenario as well as better performing removal techniques to minimize the environmental impacts of microplastics.

Removal of Non-Steroidal Anti-Inflammatory Drugs from Drinking Water Sources by GO-SWCNT Buckypapers.

Pharmaceutical products such as antibiotics, analgesics, steroids, and non-steroidal anti-inflammatory drugs (NSAIDs) are new emerging pollutants, often present in wastewater, potentially able to contaminate drinking water resources. Adsorption is considered the cheapest and most effective technique for the removal of pollutants from water, and, recently, membranes obtained by wet filtration method of SWCNT aqueous solutions (SWCNT buckypapers, SWCNT BPs) have been proposed as self-standing porous adsorbents. In this paper, the ability of graphene oxide/single-walled carbon nanotube composite membranes (GO-SWCNT BPs) to remove some important NSAIDs, namely Diclofenac, Ketoprofen, and Naproxen, was investigated at different pH conditions (pH 4, 6, and 8), graphene oxide amount (0, 20, 40, 60, and 75 wt.%), and initial NSAIDs concentration (1, 10, and 50 ppm). For the same experimental conditions, the adsorption capacities were found to strongly depend on the graphene oxide content. The best results were obtained for 75 wt.% graphene oxide with an adsorption capacity of 118 ± 2 mg g-1 for Diclofenac, 116 ± 2 mg g-1 for Ketoprofen, and 126 ± 3 mg g-1 for Naproxen at pH 4. Overall, the reported data suggest that GO-SWCNT BPs can represent a promising tool for a cheap and fast removal of NSAIDs from drinking water resources, with easy recovery and reusability features.

GO-SWCNT Buckypapers as an Enhanced Technology for Water Decontamination from Lead.

Water decontamination is an important challenge resulting from the incorrect disposal of heavy metal waste into the environment. Among the different available techniques (e.g., filtration, coagulation, precipitation, and ion-exchange), adsorption is considered the cheapest and most effective procedure for the removal of water pollutants. In the last years, several materials have been tested for the removal of heavy metals from water, including metal-organic frameworks (MOFs), single-walled carbon nanotubes (SWCNTs), and graphene oxide (GO). Nevertheless, their powder consistency, which makes the recovery and reuse after adsorption difficult, is the main drawback for these materials. More recently, SWCNT buckypapers (SWCNT BPs) have been proposed as self-standing porous membranes for filtration and adsorption processes. In this paper, the adsorption capacity and selectivity of Pb2+ (both from neat solutions and in the presence of other interferents) by SWCNT BPs were evaluated as a function of the increasing amount of GO used in their preparation (GO-SWCNT buckypapers). The highest adsorption capacity, 479 ± 25 mg g-1, achieved for GO-SWCNT buckypapers with 75 wt.% of graphene oxide confirmed the effective application of such materials for cheap and fast water decontamination from lead.

Multivariate Metal-Organic Framework/Single-Walled Carbon Nanotube Buckypaper for Selective Lead Decontamination.

The search for efficient technologies empowering the selective capture of environmentally harmful heavy metals from wastewater treatment plants, at affordable prices, attracts wide interest but constitutes an important technological challenge. We report here an eco-friendly single-walled carbon nanotube buckypaper (SWCNT-BP) enriched with a multivariate amino acid-based metal-organic framework (MTV-MOF) for the efficient and selective removal of Pb2+ in multicomponent water systems. Pristine MTV-MOF was easily immobilized within the porous network of entangled SWCNTs, thus obtaining a stable self-standing adsorbing membrane filter (MTV-MOF/SWCNT-BP). SWCNT-BP alone shows a moderately good removal performance with a maximum adsorption capacity of 180 mg·g-1 and a considerable selectivity for Pb(II) ions in highly concentrated multi-ion solutions over a wide range of lead concentration (from 200 to 10000 ppb). Remarkably, these features were outperformed with the hybrid membrane filter MTV-MOF/SWCNT-BP, exhibiting enhanced selectivity and adsorption capacity (310 mg·g-1, which is up to 42% higher than that of the neat SWCNT-BP) and consequently enabling a more efficient and selective removal of Pb2+ from aqueous media. MTV-MOF/SWCNT-BP was able to reduce [Pb2+] from the dangerous 1000 ppb level to acceptable limits for drinking water, below 10 ppb, as established by the current EPA and WHO limits. Thus, the eco-friendly composite MTV-MOF/SWCNT-BP shows the potential to be effectively used several times as a reliable adsorbent for Pb2+ removal for household drinking water or in industrial treatment plants for water and wastewater lead decontamination.

Metabolic composition and authenticity evaluation of bergamot essential oil assessed by nuclear magnetic resonance spectroscopy.

In this work, a sample of pure and certified bergamot essential oil (BEO) was extensively studied for the first time directly by NMR spectroscopy with the aim of investigating its metabolic composition, quantifying the main components of this complex natural matrix and simultaneously assessing whether the NMR technique is able to highlight possible frauds to which this high-cost product may be subjected. Eleven low molecular weight compounds have been identified by using 1D 1H and 13C-{1H} NMR experiments, 2D homo- and heteronuclear correlation NMR spectra, and 2D 1H DOSY experiments; the most abundant of them, i.e., about 90% of the sample analyzed, has been quantified by employing benzoic acid as an internal standard by 1H NMR spectrum. Moreover, since the commercial fraud of this precious oil is often due to the addition of less expensive oils, we have simulated a possible adulteration through the preparation of BEO samples to which different percentages of orange essential oil (OEO) were added. The results, obtained by combining the 1H NMR spectra collected on the adulterated samples and on pure BEO, with chemometric analysis, principal component analysis (PCA), indicate that it is possible to distinguish the sample of pure BEO from the adulterated ones and also, among them, to differentiate between the degrees of adulteration.

Carbon Nanotubes Hybrid Hydrogels for Environmental Remediation: Evaluation of Adsorption Efficiency under Electric Field.

The performance of Carbon Nanotubes hybrid hydrogels for environmental remediation was investigated using Methylene Blue (MB), Rhodamine B (RD), and Bengal Rose (BR) as model contaminating dyes. An acrylate hydrogel network with incorporated CNT was synthesized by photo-polymerization without any preliminary derivatization of CNT surface. Thermodynamics, isothermal and kinetic studies showed favorable sorption processes with the application of an external 12 V electric field found to be able to influence the amount of adsorbed dyes: stronger interactions with cationic MB molecules (qexp and qexp12 of 19.72 and 33.45 mg g-1, respectively) and reduced affinity for anionic RD (qexp and qexp12 of 28.93 and 13.06 mg g-1, respectively) and neutral BR (qexp and qexp12 of 36.75 and 15.85 mg g-1, respectively) molecules were recorded. The influence of pH variation on dyes adsorption was finally highlighted by reusability studies, with the negligible variation of adsorption capacity after five repeated sorption cycles claiming for the suitability of the proposed systems as effective sorbent for wastewater treatment.

Water-Based Aerosol for Book Deacidification: Experimental Apparatus and Theoretical Interpretation of Results.

One of the major problems in book conservation is the long-term deconstructive effect of acidity introduced into the paper by several additives, which, in the presence of humidity, generates a hydrogen cation with a strong catalytic role in cellulose depolymerization. Many types of treatment have been used in the past, but up to now, research for less-invasive, fast and cheap methods is still vividly ongoing. In this study, an approach to book deacidification is presented, where alkaline water solutions are administered to bound books in the form of micrometer-sized aerosol droplets, without using vacuum apparatus accessories. Alkaline clouds treatments were alternated with gentle air fluxes of drying steps. Few cycles are required to achieve uniform deacidification of books. The treatment could be conducted with proper apparatus on large volumes, resulting in rapid treatment time and low cost. The titration curve reporting the variation of book pH, with respect to the amount of absorbed alkaline aerosol, was built and interpreted in terms of a chemical model for the neutralization process. FTIR, PXRD and XRF spectroscopies were used to characterize the book chemistry. The effects of the treatment on the book were evaluated by measuring the degree of polymerization (DP) of the paper and the colorimetric coordinates of the paper and ink. Artificial aging tests revealed a general increase in the aging stability of the deacidified paper samples with respect to the untreated samples. Finally, the alkaline reserve data are discussed.

Alginate Bioconjugate and Graphene Oxide in Multifunctional Hydrogels for Versatile Biomedical Applications.

In this work, we combined electrically-conductive graphene oxide and a sodium alginate-caffeic acid conjugate, acting as a functional element, in an acrylate hydrogel network to obtain multifunctional materials designed to perform multiple tasks in biomedical research. The hybrid material was found to be well tolerated by human fibroblast lung cells (MRC-5) (viability higher than 94%) and able to modify its swelling properties upon application of an external electric field. Release experiments performed using lysozyme as the model drug, showed a pH and electro-responsive behavior, with higher release amounts and rated in physiological vs. acidic pH. Finally, the retainment of the antioxidant properties of caffeic acid upon conjugation and polymerization processes (Trolox equivalent antioxidant capacity values of 1.77 and 1.48, respectively) was used to quench the effect of hydrogen peroxide in a hydrogel-assisted lysozyme crystallization procedure.

WO3/Buckypaper Membranes for Advanced Oxidation Processes.

Photocatalytic materials, such as WO3, TiO2, and ZnO nanoparticles, are commonly linked onto porous polymer membranes for wastewater treatment, fouling mitigation and permeation enhancement. Buckypapers (BPs) are entanglements of carbon nanotubes, which have been recently proposed as innovative filtration systems thanks to their mechanical, electronic, and thermal properties. In this work, flexible membranes of single wall carbon nanotubes are prepared and characterized as efficient substrates to deposit by chemical vapor deposition thin layers of WO3 and obtain, in such a way, WO3/BP composite membranes for application in advanced oxidation processes. The photocatalytic efficiency of WO3/BP composite membranes is tested against model pollutants in a small continuous flow reactor and compared with the performance of an equivalent homogeneous WO3-based reactor.

Chemical Vapor Deposition of Photocatalyst Nanoparticles on PVDF Membranes for Advanced Oxidation Processes.

The chemical binding of photocatalytic materials, such as TiO2 and ZnO nanoparticles, onto porous polymer membranes requires a series of chemical reactions and long purification processes, which often result in small amounts of trapped nanoparticles with reduced photocatalytic activity. In this work, a chemical vapor deposition technique was investigated in order to allow the nucleation and growth of ZnO and TiO2 nanoparticles onto polyvinylidene difluoride (PVDF) porous membranes for application in advanced oxidation processes. The thickness of obtained surface coatings by sputtered nanoparticles was found to depend on process conditions. The photocatalytic efficiency of sputtered membranes was tested against both a model drug and a model organic pollutant in a small continuous flow reactor.

Electro-Conductive Membranes for Permeation Enhancement and Fouling Mitigation: A Short Review.

The research on electro-conductive membranes has expanded in recent years. These membranes have strong prospective as key components in next generation water treatment plants because they are engineered in order to enhance their performance in terms of separation, flux, fouling potential, and permselectivity. The present review summarizes recent developments in the preparation of electro-conductive membranes and the mechanisms of their response to external electric voltages in order to obtain an improvement in permeation and mitigation in the fouling growth. In particular, this paper deals with the properties of electro-conductive polymers and the preparation of electro-conductive polymer membranes with a focus on responsive membranes based on polyaniline, polypyrrole and carbon nanotubes. Then, some examples of electro-conductive membranes for permeation enhancement and fouling mitigation by electrostatic repulsion, hydrogen peroxide generation and electrochemical oxidation will be presented.

Nanotechnology for the Environment and Medicine.

Nanotechnology encompasses the production and applications of physical, chemical, and biological systems at scales ranging from individual atoms or molecules to around 100 nanometres, as well as the integration of the resulting nanostructures into larger systems. Nanomaterials differ from bulk materials for their relatively larger surface-area-to-mass ratio, consequently they become more chemically reactive and can show different optical, magnetic and electrical behaviours. In recent years, engineered nanomaterials have gained a particular attention in some fields such as environmental protection (soil, air and water remediation/treatment) and medicine (bio-sensing, imaging, and drug delivery). Nanoparticles can be used to monitor in real-time some pollutants (including heavy metal ions, organic compounds, microbiological pathogens, etc.) present even at extremely low concentrations in different environments. The use of nanomaterials for waste remediation/treatment results in a technology more cost-effective and rapid than current conventional approaches thanks to their enhanced surface area, transport properties, and sequestration characteristics. In addition, the integration of molecular biology and medicine with nanotechnology has resulted in new active nanostructures able to interact with biological systems. Nanocarriers based on carbon nanotubes, fumed silica (SiO2), titanium dioxide (TiO2), and magnetite and maghemite (Fe3O4, and γ-Fe2O3) nanoparticles have a distinct advantage over other drug carriers as they can be opportunely designed to reach the desired targets. As a consequence, such nanostructures can represent an important platform for enhanced medical imaging and controlled drug delivery. Here, some applications of nanomaterials as water purifying agents and drug delivery systems are reported.

Nanotechnology for the Environment and Medicine.

Nanotechnology encompasses the production and applications of physical, chemical, and biological systems at scales ranging from individual atoms or molecules to around 100 nanometres, as well as the integration of the resulting nanostructures into larger systems. Nanomaterials differ from bulk materials for their relatively larger surface-area-to-mass ratio, consequently they become more chemically reactive and can show different optical, magnetic and electrical behaviours. In recent years, engineered nanomaterials have gained a particular attention in some fields such as environmental protection (soil, air and water remediation/treatment) and medicine (bio-sensing, imaging, and drug delivery). Nanoparticles can be used to monitor in real-time some pollutants (including heavy metal ions, organic compounds, microbiological pathogens, etc.) present even at extremely low concentrations in different environments. The use of nanomaterials for waste remediation/treatment results in a technology more cost-effective and rapid than current conventional approaches thanks to their enhanced surface area, transport properties, and sequestration characteristics. In addition, the integration of molecular biology and medicine with nanotechnology has resulted in new active nanostructures able to interact with biological systems. Nanocarriers based on carbon nanotubes, fumed silica (SiO2), titanium dioxide (TiO2), and magnetite and maghemite (Fe3O4, and γ-Fe2O3) nanoparticles have a distinct advantage over other drug carriers as they can be opportunely designed to reach the desired targets. As a consequence, such nanostructures can represent an important platform for enhanced medical imaging and controlled drug delivery. Here, some applications of nanomaterials as water purifying agents and drug delivery systems are reported.

Light responsive polymer membranes: a review.

In recent years, stimuli responsive materials have gained significant attention in membrane separation processes due to their ability to change specific properties in response to small external stimuli, such as light, pH, temperature, ionic strength, pressure, magnetic field, antigen, chemical composition, and so on. In this review, we briefly report recent progresses in light-driven materials and membranes. Photo-switching mechanisms, valved-membrane fabrication and light-driven properties are examined. Advances and perspectives of light responsive polymer membranes in biotechnology, chemistry and biology areas are discussed.